John Lewis Ashton High Sleeper Bed Assembly Instructions Manual page 7

Step 7
Insert Dowel M8 x 30mm (T) into the bottom of Short Guard Rail (5) and Long Guard Rail (6). Attach
Long Guard Rail (6) to Side Guard Rail Back (12) and use bolt M6 x 100mm (F) to secure
to Leg Pole Left (3) and tighten bolts using Allen Key M4 (A). Then attach Short Guard Rail (5) to the
Side Rail Front (11) and use bolts M6 x 100mm (F) to fix it into Leg pole Right (4) and tighten
screws using Allen Key M4 (A).
Step 8
Attach Ladder Support (7) to Short Guard Rail (5) using bolt M4 x 35mm (H) and tighten it
using Allen Key M4 (A).
Please Note: Ensure all fittings are securely tightened before use.
Warning: Children can become trapped between the bed and the wall. To avoid risk of serious
injury the distance between the wall and the top safety barrier should be less than 75mm or more
than 230mm.