John Lewis Ashton High Sleeper Bed Assembly Instructions Manual page 16

Step 1
Insert Dowel M8 x 30mm (T) to Bottom Rail Front (8), Bottom Rail Back (7), Bottom Panel (4), Middle
Panel (3), Fixed Panel (5) and Side Panel (2). Insert Minifix (D) to Top Panel (1) and Side Panel (2),
as shown below. Insert Minifix (E) to Side Panel (2), as shown below.
Please Note: Both sizes of mini x are used on parts 2 above. 2 x mini x (D) are used at one end. The remaining
6 mini x used are mini x (E). Please ensure you have correctly used the hardware as above.
Step 2
Attach Bottom Rail Front (8) and Bottom Rail Back (7) to the Side Panel (2) using Camfix (C) and
tighten using Phillips Head Screwdriver as shown below.