John Lewis Ashton High Sleeper Bed Assembly Instructions Manual page 12

Step 3
Attach Bottom Panel (7) to Side Panel (2) and
tighten it using Camfix (C) with a Phillips
Head Screwdriver as shown in the diagram
below.
Step 5
Insert Back Panel (11), by sliding it into the space provided as shown in the diagram below. Then
secure Back Panel (11) using Pan Head Wooden Screw (N) as shown below.
Step 4
Attach Side Panel (2) to assembly as shown in the
diagram below and secure it using Camfix (C)
with a Phillips Head Screwdriver.