Page 1
Asuka mirror Stock numbers 803/13908 Thank you for purchasing this Asuka mirror. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. This item is HEAVY Necessary Tools Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Please check the pack contents before attempting to assemble this product.
Page 2
Fittings and parts checklist Mirror and back upright, 1 and 2 Shelf support pins x 12 Screws for shelf Shelves x 5 3 - 7 supports x 12 (B) Screws for frame x 14 (A) Wedges x 2...
Page 3
Step by step instructions 1. Lay the mirror and back frame on their sides and attach the top shelf, 3, using 8 of the longer screws (A) as shown below. 2. Then attach the bottom shelf, 7, using the remaining 6 screws (A).
Page 4
3. Push the shelf supports (C) into the frames 1 and 2, then screw the shelves in place using all 12 of the shorter screws (B) See below.
Page 5
4. Carefully lift the mirror upright and place in its final position. 5. If after placing the mirror in its final position it is not standing level. Use the wedges (6) provided. Push a wedge under the back leg of our mirror until it becomes level, fig.1 then snap it off as shown in fig.2.
Page 6
Do not sit or stand on horizontal glass surfaces.The maximum load for the glass shelves is 22.9kg. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...