Advertisement
Step 1
Insert Dowel M8 x 30mm (T) to the Support Rail (4), Table Top Support Rail (3), Front Bottom
Rail (5), Back Bottom Rail (6) and Bottom Panel(1), as shown below. Then insert Minifix (D) into Side
Panels Left and Right (2), as shown below
Step 2
Attach Table Top Support Rail (3), Front Bottom Rail (5) and Back Bottom Rail (6) to the Side Panel
(2) and tighten it using Camfix (C) with a Phillips Head Screwdriver as
shown in the diagram below. Attach Support Rail (4) to Side Panel (2),
based on the pre-drilled holes
Please Note: The mini x (D) used in parts 2
below are 11mm not 9mm.
Advertisement
