Basic Transceiver Modes - ADI AQ-16 Manual

F 1)In VFO/MR/CH mode, press and hold [F] for 2 seconds
to lock the keypad.
2)In VFO/MR/CH mode, press [F] key to activate the
second function with other keys in 10 seconds.
3)Press [F]+Power On to initialize fully all settings.
MENU In VFO/MR/CH mode, press [MENU] key to enter menu
mode.
EMG In VFO/MR/CH mode, press and hold [EMG] key 2
seconds to switch emergency alert function ON.
FM In VFO/MR/CH mode, press [FM] key to switch FM
Radio function ON/OFF.
UP Press [UP] key to select an operating frequency,
channel, menu value or others.
DOWN Press [DOWN] key to select an operating frequency,
channel, menu value or others.

Basic Transceiver Modes

This section introduces you to the basic modes you can select on
this transceiver.
■VFO Mode(VFO)
VFO is an abbreviation of Variable Frequency Oscillator.
Frequencies for both transmitting and receiving are generated
and controlled by the VFO.
Switch the power ON, in this mode you can change the desired
operating frequency by using [UP]/[DOWN] key or via numeric
keypad direct input.
■Memory Recall Mode(MR)
Memory recall mode is used for operation on memory channels
which store programmed frequencies.
Press [V/M] key to select, in this mode you can change memory
channels, using the [UP]/[DOWN] key or numeric keypad, where
you stored frequencies or related data.
Note:
You can't enter this mode unless you program one memory channel at
least.