Keypad Direct Entry; Auxiliary Functions; Keypad Lock - ADI AQ-16 Manual

PTT ID code before ending of transmitting. You can input at most
15 digits PTT ID code, include: A,B,C,D,*,#,0~9.
3. Select the desired frequency/memory channel.
● Please make sure the PTT ID function is switched on.
4.Press [PTT] switch or release [PTT] switch, the PTT ID code
will be sent out.
● After pressing the [PTT] switch or releasing the [PTT] switch, the
transmitted tone will be heard, the quantity of transmitted tone is the
same as the one of PTT ID code you programmed in software.
● If you didn't program any PTT ID code in programming software, then
you will hear nothing.

AUXILIARY FUNCTIONS

Keypad Lock

This function prevents unauthorized individuals from changing the
transceiver settings.
1.Press and hold [F] key for 2 seconds to switch the function ON
(or OFF).
● appears when the function is ON
● Sometimes, you maybe require [UP]/[DOWN] key to be unlocked when
switch the function on, you can enter menu No. 9 to set what will be
locked.
2.Press and hold [F] key for 2 seconds again to unlock the keys.

Keypad Direct Entry

You can select the desired operating frequency or memory
channel by entering digits directly via the keypad. Please entry
the next digit within 10 seconds.
■Frequency Entry
1.In VFO mode, press the numeric keys in sequence on the
keypad.
● Enter the digits in order, from the most significant down to the least
significant.
Note:
● When the current step size is 5 KHz and 25 KHz, the 1 KHz digit is
corrected according to which key is pressed for the 1 KHz digit. Pressing
[0] ~ [4] selects 0 and pressing [5] ~ [9] selects 5.
● When the current step size is 6.25 KHz and 12.5 KHz, the 1 KHz and
subsequent digits are corrected according to which keys are pressed for
the 10 KHz and 1 KHz digits.