Scan Resume Method - ADI AQ-16 Manual

■Partial Initialization (VFO)
Use to initialize all settings except the Memory Channels and
Memory Channel Lockout.
1. Press [F]+Power On.
● A confirmation message appears.
2. Then use [UP]/[DOWN] key to select SETRST。
● A confirmation message appears.
3.Press [F] key twice to finish setting and return to VFO mode.
■Full Initialization (MR)
Use to initialize all settings.
1. Press [F]+Power On.
● A confirmation message appears.
2. Then press [F] key, RESET menu will appear on LCD.
3.Press [F] key to finish setting.
SCAN
Scan is a useful function for hands-off monitoring of your favorite
channels. By becoming comfortable with all types of scan, you
will increase your operating efficiency.

Scan Resume Method

Before using scan, it's necessary to decide under what condition
you want your transceiver to continue scanning after detecting
and stopping for a signal. You can choose one of the following
modes.
◆Time-Operated Mode (Default)
Your transceiver stops scanning when detecting a signal, remains for
approximately 5 seconds, and then continues to scan even if the signal is
still present.
◆Carrier-Operated Mode
Your transceiver stops scanning when detecting a signal and remains on