Miele SmartLine Series Operating And Installation Instructions page 8

Induction wok
Table of Contents

Advertisement

Warning and Safety instructions
Never open the casing of the wok.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
While the wok is under warranty repairs should only be under-
taken by a Miele authorised service technician. Otherwise the war-
ranty is invalidated.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
The wok is not intended for use with an external timer switch or a
remote control system.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the wok must be connected to the electrical
supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).
During installation, maintenance and repair work, the wok must be
completely disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– The mains fuse is disconnected.
– The screw-out fuse is removed (in countries where this is applic-
able).
– The plug (if present) is removed from the socket. To do this, pull
the plug and not the mains connection cable.
Danger of electric shock!
Do not use the wok if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. If you detect a fault during use
switch it off immediately. Disconnect the wok from the electrical sup-
ply. Contact Miele Service.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartline cs 7611

Table of Contents