Miele SmartLine Series Operating And Installation Instructions page 37

1)
Programme
P:15 Permanent pan recognition
1)
Unlisted programmes are not assigned.
2)
The factory setting is shown in bold.
3)
After the SmartLine element has been switched on  appears in the timer display for a
few seconds.
4)
In the text and charts, the extended power levels are shown with a dot after the number
for better understanding.
5)
The keypad tone for the On/Off sensor control cannot be switched off.
2)
Settings
Code
C:00 Not active
C:01 Active
Programming
37