Connecting The Flush Valve To The Pipeline - Viega 2243.10 Instructions For Use Manual

3.3.2

Connecting the flush valve to the pipeline

Installation variants
Maintenance shut-off
Connecting the supply and disposal lines
Flush valve universal
Use suitable fixing material to fastened the base to the support pro-
file.
Ä Chapter 3.3.2 „Connecting the flush valve to the pipe-
Further see
line" on page 34 .
For mounting in a ring installation, mount the flush valve with a main-
n
tenance shut-off directly at the T-piece with the water flow.
For mounting in a series inistallation, mount and connect the flush
n
valve as the last consumer.
For maintenance purposes, use the following shut-off elements:
Wall-mounted assembly: Easytop ball valve model 2270.1, DN 25 -
n
EAN 587048 and screw fitting model 2263 - EAN 320256
Concealed mounting: Easytop slanted seat valve model 2237.1, DN
n
20 - EAN 457143
Alternative for concealed mounting: Easytop basic valve model
n
2137.09, DN 20 - EAN 624217
For connecting the siphon to the drainage system, for
example the following rules and standards are applicable:
DIN EN 12056:2001
–
DIN 1986-100:2008:05
–
Handling
34 from 62