Fasttel FLEXITALK Manual page 7

Overview codes:
‐ in rest
#*#: make connection with door unit
‐in connection
User codes
#1# : control relay 1 for 2 seconds
#2# : control relay 2 for 2 seconds
#11# : control relay 1 (on)
#10# : control relay 1 (off)
#21# : control relay 2 (on)
#20# : control relay 2 (off)
* : break off the connection with the door unit
Program codes
#90XX : set up the times to ring XX=01..99 , default =99
#501 : activate permanently the camera
#500 : do not activate permanently the camera
#511 : control relay2 for 3 seconds when there is a doorphone call
#510 : do not control relay2 for 3 seconds when there is a doorphone call =default
#521 : control relay2 continu during the whole conversation when there is a doorphone call
#520 : do not control relay2 after a doorphone call
#530 : reset to delaut values
‐ in communication with external line and door call
*: put the external line on hold and connect
When you introduce again* the external line is taken back and the connection with the door
unit is broken off.
#1# : control relay 1 for 2 seconds
#2# : control relay 2 for 2 seconds
#11# : control relay 1 (on)
#10# : control relay 1 (off)
#21# : control relay 2 (on)
#20# : control relay 2 (off)
Edition 3.5
pg 7 Flexitalk manual