Advanced Selective Pairing: A2Dp Stereo Or Handsfree - Sena SFR User Manual

SFR
Note:
1. If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
2. You have to use a motorcycle specific GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free-Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10
by wire. The GPS voice instruction or the radar detector alarm is also
heard in the background via SR10 while having an intercom conversation
or a phone call. Please refer to the SR10 User's Guide for details.
14
4.3 Advanced Selective Pairing: A2DP Stereo or
Handsfree
Phone Pairing allows the headset to establish two Bluetooth profiles:
Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the
headset to separate the profiles to enable connection with two devices.
4.3.1 A2DP Stereo Music Only
1. To enter the configuration menu, press and hold the Center Button
for 10 seconds until you hear the voice prompt, "Configuration
menu".
2. Tap the (+) Button until you hear a voice prompt, "Media selective
pairing".
3. Search for Bluetooth devices on your mobile phone. Select the
Sena SFR in the list of the devices detected on the mobile phone.
4. If your mobile phone asks for a PIN, enter 0000.