Table of Contents
Advertisement
4. To save the current station, press and hold the (+) Button for
1 second. You will then hear a voice prompt, "Save preset (#)".
5. To delete the saved station in the preset number, press and hold
the (-) Button for 1 second. You will then hear a voice prompt,
"Delete preset (#)".
11.4 Scan and Save
1. Press and hold the (+) Button for 1 second.
2. The Sena tuner pauses at each station it finds for 8 seconds
before moving to the next.
3. To save a station while scanning frequencies, tap the Center
Button at that station. You will hear a voice prompt, "Save preset
(#)". The station will be saved as the next preset number.
11.5 Temporary Preset
The Temporary Station Preset feature automatically finds and saves
the nearest 10 radio stations without changing your existing preset
stations.
1. Tap the (+) Button 3 times to automatically scan for 10 temporary
preset stations.
2. The temporary preset stations will be cleared when the headset
is powered off.
11.6 FM Sharing
You can listen to the radio during the intercom conversation. To start
FM sharing, press and hold the (-) Button for 1 second during the
intercom conversation. During FM sharing, you can move to the next
preset station and you or your friend on the intercom can change
frequencies. If either person changes the frequency, the other will
listen to the same frequency. To terminate FM sharing, press and hold
the (-) Button for 1 second or end the intercom call.
Note:
1. FM sharing will be terminated if the headset starts a multi-way intercom
conference.
2. When Audio Overlay is enabled, if an intercom call is made while you are
listening to the FM radio, FM sharing will not work.
SFR
23
Advertisement
Table of Contents
