User Information; Important Notes; Safety Instructions; Red (Radio Equipment Directive) - Bosch KTS Truck Original Instructions Manual

en 12 | KTS Truck |
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the KTS Truck and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety inst-
ructions for Bosch Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the KTS Truck and must always be
heeded.
2.3

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that (the radio
equipment type) KTS Truck conforms to the directive
2014/53/EU. The complete text of the EU declaration of
conformity is available from the following web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding natio-
nal regulations on the operation of wireless devices
in the 2.4 GHz and 5 GHz frequency band must be
heeded (e.g. WLAN or Bluetooth).
2.4

Electromagnetic compatibility (EMC)

KTS Truck satisfies the requirements of EMC directives
2014/30/EU and EN 301489-1.
This device is not intended for use within residential
areas and cannot provide sufficient protection in such
environments.
|
1 689 989 100 2018-01-24
2.5 Important information regarding
Bluetooth
Bluetooth is a wireless connection in the unlicensed
2.4 Ghz-ISM-Band (ISM: Industrial, Scientific, Medical).
This frequency range is not subject to any governmen-
tal laws and may be used in most countries without a
license. This results in many applications and devices
transmitting on this frequency band however. This can
cause frequency interference between these devices.
Depending on the environmental conditions, distur-
bance can occur in the Bluetooth connection, e. g. in
WLAN connections (WLAN: Wireless Local Area Net-
work), wireless telephones, radio-controlled thermome-
ters, radio-controlled garage door openers, radio-cont-
rolled light switches or radio-controlled alarm systems.
i
Bluetooth can lead to interference in the bandwidth
of the WLAN-network. The antennas of Bluetooth and
WLAN devices should be positioned at least
30 centimeters apart. Bluetooth-USB adapters and
WLAN must not be placed in adjacent USB sockets in
the PC/Laptop. A USB extension cable (special ac-
cessories) should be used to ensure that the Blue-
tooth-USB adapter is separate from the WLAN stick.
i
Generally, people who wear a pacemaker or other
essential electronic device should exercise extreme
caution when using wireless technology, as it may
impair the function of their particular device.
Note the following to ensure that your connectivity is as
good as possible:
R
The Bluetooth wireless signal always looks for the
shortest path. Set up a PC/Laptop with Bluetooth
USB adapter so that there are as few obstacles,
such as e. g. steel doors and concrete walls, that
could disturbed the radio signal to and from the
KTS Truck as possible.
R
If there are problems with the Bluetooth connec-
tion, you can activate the USB connection and use it
instead of the Bluetooth connection.
R
It is not possible to operate another piece of bluetooth
hardware installed or plugged into the PC/laptop, as
the data communication between the KTS Truck and
the control unit would be disrupted as a result.
Robert Bosch GmbH