3 1/2 2A Mini Digital Clamp Meter user manual
FRONT PANEL DESCRIPTION
1. COM Input Jack / V/Ω Input Jack
2. 1/2-digit LCD Display Panel
3. Function Switch Button
(SEL/MAX/HOLD)
4. Function/range select rotary selector
5. Trigger
6. Protection edge
7. Current Clamp
LCD DISPLAY SYMBOLS
~
Alternating signal test
AUTO
Auto range mode ?
This indicates that the display data is being held
HOLD
Temperature test
℃/℉
Ohms, Kilo-ohms, mega-ohms resistance test
Ω μm /
Amperes(Current)or Milli-volts, Volts(Voltage
VA
)
MAX
The maximum value is being measured
-
Negative polar mark
GENERAL SPECIFICATIONS
Auto range and manual range options are available.
1.
Over range protection is provided for all ranges.
2.
Display:3 1/2-digit(1999 count)
3.
Direct signal test
Low Battery
Diode test
Continuity buzzer
4