Measuring Ac Current - Pro'sKit MT-3102 User Manual

3 1/2 2A Mini Digital Clamp Meter user manual
Do not input the voltage which more than 600V DC.
1) Plug the black test lead into the COM jack and the red
test lead into the V/Ω Jack.
2) Set the rotary selector to V
get into DC V range.
3) Connect the test leads to the voltage source or load
terminals for measurement.
4) Take the reading on the LCD.

MEASURING AC CURRENT

Beware of Electrocution.
Ensure that the test leads are disconnected from the
1) meter before making current clamp measurements. Set the
rotary selector to the A~2A/20A or 200A/400A range
position.
2) Press the trigger to open jaw. Fully enclose only one
conductor.
3) Take the reading on the LCD. MEASURING
RESISTANCE
Beware of Electrocution.
Ensure that the test leads are disconnected from the meter
before making current clamp measurements.
1) Plug the black test lead into the COM jack and the red test
lead into the V/Ω Jack.
Set the rotary selector to Ω/
2)
make the meter get into AC V range.
position to make the meter
WARNING
WARNING
/
11
range position to