Advertisement
Table of Contents
Page 1 of 2
Vertical Processor Sling, Fixed Mount
Compatible with c:scape and Frameone worksurfaces
Installation Instructions 21078501 Rev C
CPRSLFO
Tools required:
1
Place base bracket on underside
of worksurface with slot towards
the rear of the desk and base
bracket no more than 1/4" from
the cantilever to allow maximum
clearance between CPU and desk
leg. Install with four (4) 5/8" long
#2 Phillips
screws (included).
2
Insert one (1) bolt through sling
support bracket and loosely install
the nut on the opposite side.
3
Power Drill
Thread straps through sling
support bracket and place
assembly onto the CPU.
7/16"
NUT
2
CANTILEVER
BASE
BRACKET
SCREW
3
BOLT
Setback the base bracket, as shown,
to allow the CPU to be flush with the
front edge of the worksurface.
For example: Setback 6-3/4" when
using an 18" deep CPU.
SLOT
1
STRAP
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Steelcase CPRSLFO
Summary of Contents for Steelcase CPRSLFO
- Page 1 Vertical Processor Sling, Fixed Mount Compatible with c:scape and Frameone worksurfaces Installation Instructions 21078501 Rev C Setback the base bracket, as shown, CPRSLFO to allow the CPU to be flush with the front edge of the worksurface. For example: Setback 6-3/4" when CANTILEVER using an 18"...
- Page 2 Insert second bolt through the empty hole in the sling support bracket. Tighten both bolts. BOLT For further information, please go to the Details website details-worktools.com or call 800.833.0411 P.O. Box 1967 / CD-5E Grand Rapids, MI 49501-1967 ©2010 Steelcase Inc. All rights reserved. 11/11...
Need help?
Do you have a question about the CPRSLFO and is the answer not in the manual?
Questions and answers