Remote Control - AVer CAM520 Pro User Manual

Remote Control

Name
1. Camera select
2. Camera directional
control
3. SmartFrame
4. OSD menu
5. Zoom in/Zoom out
3
Function
One remote can control up to 3 AVer
VC/CAM/VB series cameras. You can
use AVer PTZApp to set numbers
associated with each camera, and
then select which camera you would
like to control using the remote.
[Note] If you only have one camera
that requires no additional setting, the
default is camera 1.
If camera 2 or 3 is selected, the
remote will be unable to control the
camera. In this case, please press
camera 1 on your remote.
Use the directional buttons on the
remote to control the direction of the
camera. Press the directional button to
move the camera or press and hold to
continuously pan or tilt.
One-click automatic FOV adjustment
to fit all participants.
Press and hold on the remote
for 2 seconds to switch the
SmartFraming function between auto
and manual mode; a message (as
figure shown) will display on the
screen to indicate auto or manual
mode.
[Note] While in the video conference
meeting, participants must face the
camera for proper face detection
(SmartFrame). Side facial profiles are
not detectable.
To call out OSD menu. Only supports
Advanced model while connecting
HDMI output to TV monitor.
Increase/Decrease the camera zoom.