Table of Contents
Advertisement
GB
Key to symbols
Read all the operating
instructions before using
or carrying out service
procedures on the machine.
Read, understand, and follow
all warnings and instructions
in these operating instructions
and on the machine.
Always wear eye protection,
hearing protection, helmet,
mask, gloves, trousers
and boots when using the
machine. A first aid box
should always by on hand.
This product conforms to the
applicable EU Directives.
Double insulated.
WARNINg!
Under no circumstances may the machines be modified from the original designs without the manufacturer's
approval. Unapproved modifications can result in serious personal injury or even death.
WARNINg!
These machines can be dangerous if they are used improperly or without due care and such use can lead to
serious accidents or, in the worst case, fatal accidents. It is very important that you read through these operating
instructions and understand the contents before you use the machines.
MAX ø120 mm / 4.75 in
The drilling machine must be
suitable and designed for the size
of drill bit. Max drill bit diameter 120
Load/current indication
(LCS-Load control system)
Use a drill that is suitable for the
task.
Ø
4
Advertisement
Table of Contents
