Connector; Figure 3-1 Lc/Pc Fiber Connector; Table 3-2 Fiber Connectors - Raisecom ISCOM5508 Hardware Description

Raisecom
ISCOM5508 (B) Hardware Description
Usage
Connect the ISCOM5508 to
the ODF through the PON
interface.




3.1.2 Connector

Fiber connectors are different in shape, ferrule end-face, and pigtail sheath color, as shown in
Table 3-2.

Table 3-2 Fiber connectors

LC/PC
SC/PC
LC/PC fiber connector
Figure 3-1 shows the appearance of the LC/PC fiber connector.

Figure 3-1 LC/PC fiber connector

Local
connector
SC/PC
SC/PC
SC/PC
Choose the connector type and jumper cable length reasonably based on the on-
site requirements.
The supported connector of the optical interface depends on the optical module.
Choose a connector suitable for the optical interface. Otherwise, it may increase
additional loss of fiber links, reduce transmission quality of services, or even
damage the connector and optical interface.
Connector
Clamping square fiber connector/micro-convex
grinding-and-polishing ferrule end-face
Square fiber connector/ micro-convex grinding-
and-polishing ferrule end-face
Raisecom Technology Co., Ltd.
Remote
connector
LC/PC 2 mm single-mode fiber
FC/PC 2 mm single-mode fiber
SC/PC 2 mm single-mode fiber
Description
3 Fiber and cables
Type Standard
Pigtail sheath color
Blue
Blue
21