1. Manuals
  2. Brands
  3. Raisecom Manuals
  4. Touch terminals
  5. ISCOM5508
  6. Hardware description

Raisecom ISCOM5508 Hardware Description

Hide thumbs Also See for ISCOM5508:
Table of Contents

Advertisement

Quick Links

Download this manual
www.raisecom.com
ISCOM5508 Hardware Description

Advertisement

Table of Contents
loading

Related Manuals for Raisecom ISCOM5508

Summary of Contents for Raisecom ISCOM5508

  • Page 1 ISCOM5508 Hardware Description...
  • Page 2 Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 FAQ in the related manual, and if your question is not covered, send email by using the following web page: http://www.raisecom.com/en/contact-us.html. If you have comments on the ISCOM5508 specification, instead of the web page above, please send comments to: export@raisecom.com...

  • Page 4: Table Of Contents

    Components ---------------------------------------------------------------------------------- 4 Overview --------------------------------------------------------------------------------------------------------------------- 4 2.1.1 Components classification ------------------------------------------------------------------------------------------------------------ 4 2.1.2 Components appearance ------------------------------------------------------------------------------------------------------------- 4 2.1.3 Hardware information label ----------------------------------------------------------------------------------------------------------- 6 Master control board-ISCOM5508 ------------------------------------------------------------------------------------ 7 2.2.1 Function introduction ------------------------------------------------------------------------------------------------------------------- 7 2.2.2 Appearance ------------------------------------------------------------------------------------------------------------------------------- 7 2.2.3 Interface ----------------------------------------------------------------------------------------------------------------------------------- 7 2.2.4 Indicators ---------------------------------------------------------------------------------------------------------------------------------- 9 2.2.5...
  • Page 5 3.5.2 Appearance ----------------------------------------------------------------------------------------------------------------------------- 23 3.5.3 Technical specifications ------------------------------------------------------------------------------------------------------------- 24 Grounding cable --------------------------------------------------------------------------------------------------------- 24 3.6.1 Overview -------------------------------------------------------------------------------------------------------------------------------- 24 3.6.2 Appearance ----------------------------------------------------------------------------------------------------------------------------- 24 3.6.3 Technical specifications ------------------------------------------------------------------------------------------------------------- 25 Chapter 4 Small Form-Factor Pluggables ------------------------------------------------------ 26 1000M SFP optical module ------------------------------------------------------------------------------------------- 26 4.1.1 Function and appearance ----------------------------------------------------------------------------------------------------------- 26 4.1.2 Label ------------------------------------------------------------------------------------------------------------------------------------- 26...
  • Page 6 ISCOM5508 Configuration Guide ISCOM5508 Installation Guide Organization This manual is an introduction of the main functions of ISCOM5508. To have a quick grasp of the using of the ISCOM5508, please read this manual carefully. The manual is composed of the following chapters.
  • Page 7 General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel.
  • Page 8 a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist. Before working on equipment connected to power lines or telecommunication lines, remove jewelry or any other metallic object that may come into contact with energized parts. Unless otherwise specified, all products are intended to be grounded during normal use.

  • Page 9: Chapter 1 Product Overview

    Physical parameters 1.1 Overview ISCOM5508 device belongs to the next generation of small-capacity, 1U card EPON OLT products, mainly facing the industrial customers and providing rich features and flexible networking modes so as to meet low-density, long-distance optical fiber access requirements.

  • Page 10: Slot Distribution

    Power 2 Master board slot (Slot 1) Figure 1-2 Slot distribution of ISCOM5508 device 1.3 Physical parameters The physical parameters of ISCOM5508 device are shown in the table below. Table 1-1 Physical parameters of ISCOM5508 device Technical index Description Device dimension...
  • Page 11 User Manual Technical index Description Working vltage 110V/220V Tolerance range 100V~240V Rate 50Hz/60Hz...

  • Page 12: Chapter 2 Components

    AC power module-RPA0601  DC power module-RPD0601  Fan module-FANS306 2.1 Overview 2.1.1 Components classification ISCOM5508 device components can be divided into 4 classifications according to the purposes:  Master control board  EPON interface subcard  Power module ...
  • Page 13 Figure 2-1 ISCOM5508 master control board appearance 2.1.2.2 Extending subcard appearance EP4 extending subcard appearance is shown as below. Figure 2-2 EP4 extending subcard appearance 2.1.2.3 Power module appearance ISCOM5508 power module appearance is shown as below. Figure 2-3 ISCOM5508 power module appearance...

  • Page 14: Hardware Information Label

    Figure 2-4 Fan module FANS306 appearance 2.1.3 Hardware information label ISCOM5508 components hardware information label is sticked on the full position of PCB so as users to view. Figure 2-5 ISCOM5508 components hardware information label Note: For different components have different layout, the location of hardware information labels...

  • Page 15: Master Control Board-Iscom5508

    4 uplink 1000M SFP optical ports. It can provide SNMP interface and Console interface for device management. 2.2.2 Appearance ISCOM5508 master control board can only be placed in Slot1, as shown in the figure below. Figure 2-6 ISCOM5508 master board panel appearance 2.2.3 Interface There are 12 interfaces on ISCOM5508 master board panel.
  • Page 16 User Manual Interface Interface Purpose Description name type PON 1/2/3/4 PON SFP Service downlink The available optical module type: interface 1000BASE-PX20-D/1000BASE-PX20-D-M Note: The 2 RJ45 uplink interface GE 1/2 not only can be uplink interfaces, but also be used to access Ethernet service.

  • Page 17: Indicators

    1000BASE-X, 1000BASE-PX20-D and 1000BASE-PX20-D-M optical module. 2.2.4 Indicators There are 16 indicators on master board panel of ISCOM5508, 6 of them are RJ45 interface indicators. The definition of indicators is shown in the table below. Table 2-7 Indicators on ISCOM5508 master board panel...

  • Page 18: Appearance

    User Manual 2.3.2 Appearance EP4 subcard can be plugged at Slot 2 or Slot 3, as shown in the figure below. Figure 2-7 EP4 subcard panel 2.3.3 Interfaces There are 4 interfaces on EP4 subcard panel. The interface types and purposes are shown in the table below.

  • Page 19: Ac Power Module-Rpa0601

    User Manual 2.4 AC power module-RPA0601 2.4.1 Function overview RPA0601 module is the AC power module of ISCOM5508 device, the functions are:  Providing 110V/220V AC power supply access, redundant power supply for backup.  In support of hot-swapping.

  • Page 20: Normal Specifications

    Voltage range: 100V~240V (50Hz/60Hz) 2.5 DC power module-RPD0601 2.5.1 Function overview RPD0601 module is the DC power module of ISCOM5508 device, the functions are:  Providing -48V or +24V DC power supply access, redundant power supply for backup.  In support of hot-swapping.

  • Page 21: Interfaces

    User Manual Figure 2-9 RPD0601-48S12 power module panel Figure 2-10 RPD0601-24S12 power module panel 2.5.3 Interfaces There is 1 interface on RPD0601-48S12 power module panel. The interface type and purpose are shown as below. Table 2-12 RPD0601-48S12 power module panel interface...

  • Page 22: Normal Specifications

    FANS306 module is the fan module of ISCOM5508 device, the functions are:  In support of fan monitor and automatic speed adjustment.  In support of hot-swapping. 2.6.2 Appearance FANS306 fan module can only be plugged at FAN module slot of ISCOM5508 device, as shown below.

  • Page 23: Indicators

    User Manual Figure 2-11 FANS306 fan module panel 2.6.3 Indicators There are 2 indicators on FANS306 module panel. The description is shown as below. Table 2-15 FANS306 module indicator Print Status Description Power supply indicator. Green  ON: power supply works in order.

  • Page 24: Chapter 3 Optical Fiber And Cable

    Grounding cable 3.1 Optical fiber 3.1.1 Overview As typical EPON OLT device, it is recommended to use G.652 single mode fiber for ISCOM5508 device. Fiber connector types available to ISCOM5508 device are shown as below. Table 3-1 Type of fiber connector...
  • Page 25 User Manual  When plugging fiber in, aligning optical interface with fiber head and plugging it in with suitable strength.  When pulling fiber out, pressing the clip connector and push the plug in a little, and then pull the fiber out.

  • Page 26: Ethernet Cable

    Connect ISCOM5508 device Ethernet electrical port to other devices.  Connect ISCOM5508 device SNMP port to NMS network. Ethernet service interface of ISCOM5508 device is in support of straight-through and cross-over connection cable auto-negotiation, so both kinds of network cables are available to connect Ethernet service interface.
  • Page 27 Green/White Blue Blue/White Green Brown/White Brown According to EIA/TIA standard, the frequently-used ISCOM5508 device Ethernet cable contains two types:  Straight-through Ethernet cable (Both RJ45 crystal heads are EIA/TIA 568B pin arrangement)  Cross-over Ethernet cable (One side RJ45 crystal head is EIA/TIA 568B pin arrangement, the other side is EIA/TIA 568A pin arrangement) 100M/1000M straight-through network cable connection table is shown as below.
  • Page 28 User Manual Starting from (RJ45) Stopping at (RJ45) Color Remark PIN 6 PIN 6 Green PIN 7 PIN 7 White/Brown twisted pair PIN 8 PIN 8 Brown 100M/1000M straight-through network cable connection figure is shown as below: Figure 3-5100M/1000M Straight-through network cable connection figure 100M cross-over network cable connection table is shown as below.

  • Page 29: Configuration Cable (Console Interface Cable)

    Figure 3-71000M cross-over network cable connection figure 3.3 Configuration cable (Console interface cable) 3.3.1 Overview The configuration cable is used to connect Console interface of ISCOM5508 with network management PC, facilitating ISCOM5508 device configuration. 3.3.2 Appearance Configuration cable connector used by ISCOM5508 is DB-9 connector and RJ45 connector, as figure shows below.

  • Page 30: Technical Specifications

    Unshielded category 3 flat cable Length 3.3.4 Pin arrangement The pin arrangement of ISCOM5508 device configuration cable is shown in figure below. Figure 3-9 Configuration cablepin arrangement Note: “*” in the above figure indicates non-terminal symbol. 3.4 DC power cable 3.4.1...

  • Page 31: Technical Specifications

    AC power cable transmits 110V/220V AC from DC distribution device to RPA0601 AC power module cable terminal and supplies power for the whole ISCOM5508 device. ISCOM5508 uses different AC power cables according to different power cord standards in different regions.

  • Page 32: Technical Specifications

    2m cable, then the cable name is USA standard three-plug-10A/250V-2m/RoHS. 3.6 Grounding cable 3.6.1 Overview Grounding cable is used to connect ISCOM5508 device chassis to ground. 3.6.2 Appearance ISCOM5508 device grounding cable contains OT terminal and coaxial-cable, as shown in the figure below. Figure 3-13 Grounding cable...

  • Page 33: Technical Specifications

    Table 3-12 Specification of grounding cable Item Description Connector Bare-press terminal-OT-2.5mm2-M4-tinning-round pre-insulation terminal-16~14AWG Cable model Electron power cable-450V/750V-H07Z-K-2.5mm2-yellow/green-Low-smoke halogen-free burn-resistent cable Note: There isn’t grounding cable in ISCOM5508 device packing list except OT terminal. If needed, please make one according to cable technical specification.

  • Page 34: Chapter 4 Small Form-Factor Pluggables

    User Manual Chapter 4 Small Form-Factor Pluggables This chapter introduces the small form-factor pluggables used by ISCOM5508 device.  1000M SFP optical module  PON SFP optical module 4.1 1000M SFP optical module 4.1.1 Function and appearance 1000M SFP (Small Form-factor Pluggables) is a kind of transceiving optical module used to 1000Mbit/s rate telecommunications network or data network communication system 1000M SFP optical module appearance is shown as below.

  • Page 35: Technical Specifications

    Model Description Transmission distance: M: transmission distance is 0.55km S1: transmission distance is 15km (Raisecom defined short-range ID) LH1: transmission distance is 40km, transmission wavelength is 1310nm S2: transmission distance is 40km, transmission wavelength is 1550nm (Raisecom defined middle-range ID)

  • Page 36: Pon Sfp Optical Module

    User Manual Attribute Description Optical interface attribute Depend on selected SFP optical module Working mode Full-duplex Compliant standard IEEE 802.3 Network protocol 1000 BASE -X SFP optical module attribute is shown as below. Table 4-3 1000 BASE -X SFP optical module attribute...

  • Page 37: Label

    User Manual Figure 4-3 PON SFP optical module appearance 4.2.2 Label The optical module type supported by ISCOM6800 EPON service interface:  1000BASE-PX20-D  1000BASE-PX20-D-M The label is sticked at the bottom of optical module, as shown in the figure below. User can view optical module model from the label.
  • Page 38 User Manual Parameter Index Transmission speed Tx: 1.25Gbit/s Rx: 1.25Gbit/s Interface type SC/PC Maximum transmission distance 20km Cabel type Single mode fiber Wavelength (Laser) Tx: 1490nm (DFB) Rx: 1310nm (APD/TIA) Tx optical power 2dBm~7dBm Extinction ratio Rx sensitivity -29dBm Min.

  • Page 39: Chapter 5 Indicators Table

    User Manual Chapter 5 Indicators Table All types of indicators on ISCOM5508 device chassis and components are shown as below. Table 5-1 ISCOM5508 device indicators table Print Status Description Power indicator. Green  ON: power works in order. ...

  • Page 40: Chapter 6 Weight And Power Consumpation Table

    User Manual Chapter 6 Weight and Power Consumpation Table The weight and power consumpation table of ISCOM5508 device chassis and components are shown as below. Table 6-1 ISCOM5508 device weight and power consumpation Components Description Standard weight 5.2kg Device weight Fullload weight 5.9kg...

  • Page 41: Appendix A Glossary

    User Manual Appendix A Glossary Cable to connect device to ground, usually it is co-axial cable in yellow and Grounding cable green. Label Signs for cable, chassis and warnings. Single mode fiber Only a single mode can be transmitted in one fiber.
  • Page 42 User Manual Asynchronous transmission mode, no handshaking signal, point-to-point RS232 communication with other station RS232 or RS422, transparent transmission, speed up to 19.2kbit/s. Unit of dimension, U is short for unit, take 44.45mm as basic unit, namely 1U=44.45mm. The auto negotiation procedure is: the port at one site adapts its bit rate and Auto-negotiation duplex mode according to the bit rate and duplex mode.

  • Page 43: Appendix B Acronyms

    User Manual Appendix B Acronyms Numerics American wire gauge Access Control List BPDU Bridge Protocol Data Unit Connectivity Fault Management Electro Static Discharge ETSI European Telecommunications Standards Institute LLDP Link Layer Discovery Protocol MPLS Multi-protocol label switching Optical Distribution Frame...
  • Page 44 User Manual Packet Transport Network Precision Time Protocol Quality of Service Relative Humidity Service-Level Agreement Uninterruptible Power Supply...
  • Page 45 Address: Building 2, No. 28 of the Shangdi 6th Street, Haidian District, Beijing Postcode: 100085 Tel: +86-10-82883305 Fax: +86-10-82883056 Email: export@raisecom.com http://www.raisecom.com...

Table of Contents