Mercedes-Benz G-Class 2020 Operator's Manual page 412

410 Wheels and tires
Position jack 4 on the comfort bushing on
#
transverse link 5.
Raise the vehicle by pumping until the tire is
#
no more than 1.2 in (3 cm) off the ground.
Loosen and remove the wheel (
/
#
Raising the vehicle at the rear
Pull out the adapter from the jack.
#
Position jack 4 at the jack support point of
#
axle carrier tube 6.
Keep pumping until axle carrier tube
#
securely in the recess of the jack and the
base of the jack lies evenly on the ground.
page 410).
Raise the vehicle by pumping until the tire is
#
no more than 1.2 in (3 cm) off the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the wheel bolts.
#
Remove the wheel.
#
Install the new wheel (
#
6 sits
Mounting a new wheel
Requirements:
The wheel is removed (
R
page 410).
/
& WARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut threads or wheel hub/wheel mounting
bolt threads can cause the wheel bolts/
page 408).
/
wheel nuts to come loose.
As a result, you could lose a wheel while driv‐
ing.
Never oil or grease the threads.
#
In the event of damage to the threads,
#
contact a qualified specialist workshop
immediately.
Have the damaged wheel bolts or dam‐
#
aged hub threads replaced.
Do not continue driving.
#
page 410).
/
page 410).
/