Mercedes-Benz G-Class 2020 Operator's Manual page 100

98 Seats and stowing
Folding back the rear bench seat
* NOTE Damage caused by trapping the
seat belt when folding back the seat
backrest
The seat belt could become trapped and thus
damaged when the seat backrest is folded
back.
Make sure that the seat belt is not trap‐
#
ped when folding back the seat back‐
rest.
Swivel seat backrest 1 back until it
#
engages.
Swivel the seat cushion 2 back.
#
Rear seat backrests
Adjusting the angle of the rear seat backr‐
ests
& WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
If this is the case, the vehicle occupant
R
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
Objects or loads in the trunk/cargo com‐
R
partment cannot be restrained by the
seat backrest.
Make sure that the seat backrest and
#
the rear bench seat/rear seat are
engaged before every trip.
You can adjust the angle of the rear seat backr‐
ests. There are several possible detent positions.
Pull the left or right release lever
#
direction of the arrow and hold it in position.
1 in the