Mercedes-Benz G-Class 2020 Operator's Manual page 144

142 Driving and parking
Press DYNAMIC SELECT switch
#
or backwards.
The selected drive program appears in the
multifunction display in the instrument clus‐
ter and in the multimedia system display.
Selecting the Desert drive program
% The availability of the following function is
country-dependent.
Change to drive program E (Eco).
#
Press and hold DYNAMIC SELECT switch
#
backwards for approx. three seconds.
A visual and acoustic message is emitted.
Confirm the selection with the left touchpad
#
button on the steering wheel.
The Desert Drive Program Act. ESP Unavaila-
ble See Operator's Manual message appears
in the instrument cluster. The ESP
warning lamps light up.
%
Observe the notes on the Desert ESP
% A visual and acoustic message is emitted
again when the driver's door is opened while
the engine is running to draw attention to
1 forwards restricted road suitability in case of a change
of drivers.
Press DYNAMIC SELECT switch
#
to deactivate the Desert drive program.
% The drive program C (Comfort) is automati‐
cally active after starting the vehicle.
Configuring drive program I
Multimedia system:
1
Vehicle e DYNAMIC SELECT
4 5
Individual
5
Select the individual setting.
#
Switching the operation feedback for drive
program on/off
®
and ABS
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
®
.
Switch Notification for User
#
When this function is active, a corresponding
message is shown in the media display when
a drive program is selected with the
DYNAMIC SELECT switch.
Displaying vehicle data
Multimedia system:
1 forwards
Vehicle
4
Select Vehicle
#
The following information is displayed:
Compass
R
Wheel angle
R
Incline
R
Gradient
R
Altitude
R
LOW RANGE (
R
Locking (
R
Displaying engine data
Multimedia system:
Vehicle
4
on O or off ª.
Select Engine
#
% The values for engine output and engine tor‐
que may deviate from the nominal values.
e DYNAMIC SELECT
5
Data.
page 149)
/
page 150)
/
e DYNAMIC SELECT
5
Data.