Mercedes-Benz G-Class 2020 Operator's Manual page 373

Securing the wheel to the spare wheel
bracket
Use nuts 5 to secure the faulty wheel to the
#
spare wheel bracket. Specified tightening
torque: 14.75 lb-ft (20 Nm)
Position cover panel 4 again. Make sure
#
that retainer 6 of the cover panel engages
in recess 7.
Attach cover ring 3 again and close the
#
lock.
% Make sure that the lock does not cover the
rear view camera. If necessary, turn cover
ring 3 slightly.
Vehicles with an emergency spare wheel:
Observe the notes on the emergency spare
wheel.
Spare wheel bracket with protective tire
cover
Removing the protective tire cover
Pull protective tire cover 1 on the rear side
#
apart and remove it
Breakdown assistance 371
Removing the wheel from the spare wheel
bracket and securing a faulty wheel
Remove wheel nuts 2.
#
Remove the spare wheel.
#
Use nuts 2 to secure the faulty wheel to the
#
spare wheel bracket. Specified tightening
torque: 14.75 lb-ft (20 Nm)