Mercedes-Benz G-Class 2020 Operator's Manual page 391

pressure telltale when one or more of your
tires is significantly under-inflated. Accord‐
ingly, when the low tire pressure telltale illu‐
minates, you should stop and check your
tires as soon as possible, and inflate them to
the proper pressure. Driving on a signifi‐
cantly under-inflated tire causes the tire to
overheat and can lead to tire failure. Under-
inflation also reduces fuel efficiency and tire
tread life, and may affect the vehicle's han‐
dling and stopping ability.
Please note that the TPMS is not a substitute
for proper tire maintenance, and it is the
driver's responsibility to maintain correct tire
pressure, even if under-inflation has not
reached the level to trigger illumination of
the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when
the system is not operating properly. The
TPMS malfunction indicator is combined with
the low tire pressure telltale. When the sys‐
tem detects a malfunction, the telltale will
flash for approximately one minute and then
remain continuously illuminated. This
sequence will continue upon subsequent
vehicle start-ups as long as the malfunction
exists.
When the malfunction indicator is illumina‐
ted, the system may not be able to detect or
signal low tire pressure as intended. TPMS
malfunctions may occur for a variety of rea‐
sons, including the installation of replace‐
ment or alternate tires or wheels on the vehi‐
cle that prevent the TPMS from functioning
properly.
Always check the TPMS malfunction telltale
after replacing one or more tires or wheels
on your vehicle to ensure that the replace‐
ment or alternate tires and wheels allow the
TPMS to continue to function properly.
The system checks the tire pressure and the tire
temperature of the tires installed on the vehicle
by means of a tire pressure sensor.
New tire pressure sensors, e.g. in winter tires,
are automatically taught-in during the first jour‐
ney they are used.
Wheels and tires 389
The tire pressure and the tire temperature
appear in the multifunction display
( page 390).
/
If there is a substantial pressure loss or if the
tire temperature is excessive, you will be warned
in the following ways:
via display messages ( page 458)
/
R
via the h warning lamp in the instrument
R
cluster ( page 487)
/
The tire pressure monitoring system is only an
aid. It is the driver's responsibility to set the tire
pressure to the recommended cold tire pressure
suitable for the operating situation. Set the tire
pressure for cold tires using a tire pressure
gauge. Note that the correct tire pressure for the
current operating situation must first be taught-
in to the tire pressure monitoring system.
In most cases, the tire pressure monitoring sys‐
tem will automatically update the new reference
values after you have changed the tire pressure.
You can, however, also update the reference val‐
ues by restarting the tire pressure monitoring
system manually ( page 390).
/