Gold's Gym Trainer 720 User Manual page 11

7. Attach the Latch (93) to the Left Upright (94) with
two #10 x 1" Screws (7); start both Screws,
and then tighten them.
8. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 27). Note: Extra parts may be included.
7
93
7
11
94