Gold's Gym Trainer 720 User Manual page 10

4. Pivot the Handrails (91) down to the horizontal
position.
5. Tighten a 3/8" x 2 3/4" Screw (2) with a 3/8" Star
Washer (27) into the bottom of each Handrail
(91) as shown; firmly tighten the Screws.
6. Slide the Right Inner Upright Cap (100) between
the Right Upright (95) and the Motor Hood (69).
Then, press the Right Outer Upright Cap (101)
against the Right Inner Upright Cap until they
snap together.
Repeat this step on the left side of the
treadmill.
4
5
91
27
2
6
10
91
91
91
27
2
95
100
69
101