Gold's Gym Trainer 720 User Manual page 28

SYMPTOM: The displays of the console do not
function properly
a. If the console does not boot up properly, or
if the console freezes and does not respond,
reset the console to the factory default settings.
IMPORTANT: Doing this will erase all the
custom settings you have made to the console.
Resetting the console requires two people. First,
press the power switch into the off position. Next,
locate the small reset opening (B) on the backside
of the console. Using a bent paper clip (C), press
and hold the reset button inside the opening, and
have a second person press the power switch
into the on position. Continue holding the reset
button until the console turns on. When the reset
operation is complete, the console will turn off and
then turn back on. If it does not, use the power
switch to turn the incline trainer off and then
on again. Once the console turns on, check for
fi rmware updates (see step 3 on page 22). Note: It
may take a few minutes for the console to be ready
for use.
a
28
B
C