Table of Contents
Advertisement
Procedure to connect to the Streaming Server via the Network port
The following procedure will allow the installer to setup the Streaming Server via the GUI
1. Connect a standard CAT5e cable from HDIP Network port to a switch or directly
to a PC or laptop.
2. Using a PC go to the Control Panel to "Network and Internet"
Start- Control Panel ==> View Network Status and Tasks
3. Select 'Change Adapter Settings' from the left plane
NACE:
610-429-1511
| sales@datatronix.biz | www.datatronix.biz | DT-HDIPCOM Manual v1.0
Page 8
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-HDIPCOM and is the answer not in the manual?