ITech IT8000 Series User Manual page 45

instrument and PC over LAN interface and enter the instrument's IP address in-
to the address bar at the top of your PC's Web browser, you can access the
front panel control functions including the LAN configuration parameters.
•
If you want to remotely control the instrument using the built-in web server, you
must enable the web service. See
•
The format of the address entered in the address bar of the browser is http://
192.168.0.100. The specific IP address is subject to the actual instrument
settings.
The opened page is displayed as follows:
The homepage of different models are different. The actual shown page shall
be subject to the connected instrument.
You can select different pages by clicking the buttons shown in the navigation
bar on the left side of the window. The detailed descriptions are as follows.
•
Home：Web home interface, displays the model and appearance of the
instrument;
•
Information: Displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
•
Web Control: Enables the Web control to begin controlling the instrument.
This page allows you to monitor and control the instrument;
•
LAN Configuration: Reconfigure the LAN parameters;
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
2.5.2 LAN Interface for details.
34