Configuration Menu Function - ITech IT8000 Series User Manual

Table 1–1 VFD Indicator Lamps Description
Flag
OFF
CV
CC
*
CR
Shift
SRQ
CW

1.7 Configuration Menu Function

This section gives an overview of the configuration menu of the IT8000 series
load.
The procedures to operate the configuration menu are as follows.
1. Press the composite keys [Shift]+[V-set] (Config) on the front panel to enter
Function
Description
The input of the
load is turned off.
The load is in a
state of constant
voltage input.
The load is in a
state of constant
current input.
The keyboard lock
is turned on.
The load is in a
state of constant re-
sistance input.
Using composite
function key
Indicates that the
internal status re-
quest event occurs.
The load is in a con-
stant power input
state.
the configuration menu.
Copyright © Itech Electronic Co., Ltd.
Flag Function Description
Sense Sense function of the load is
enabled.
Rear Analog function begin to
work.
Addr When received command
successfully, the flag will dis-
play 3 seconds.
Rmt Indicates that the instrument
is working in remote control
mode.
Error Error occur
Prot The instrument enters the
protection state.
Trig The instrument is in a state
of waiting for a trigger.
- -
Quick Reference
9