Advertisement
BEFORE YOU BEGIN
Adult assembly required. Remove contents from box. Inspect the contents for scratches in the paint and/or dents that
may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
T-bar Hardware Cover
Front Fork
Front Wheel
Required Tools
Philips Screwdriver
(Included)
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Handlebar Grips
T-bar
Deck
8/10 mm Wrench
(Included)
Rear Fender
Rear Wheel
1
2
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR RAZOR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied
at the time of sale was selected
on the basis of its compatibility
with the frame and all other parts.
Certain aftermarket products may
not be compatible and will void the
warranty.
Product ID Locations:
See locations to the left
1. Deck (underneath unit)
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Screws
• Owner's Manual
• Philips Screwdriver
• 8/10 mm Wrench
Advertisement
