Omron MicroHAWK F320-F User Manual page 77

3 Getting Started with AutoVISION
3. Edit the Job in AutoVISION
After you have created a new job, loaded a job from your PC, or uploaded a job from the camera, you
will proceed to the Edit view to refine your machine vision job. The Camera parameters below the
captured image allow you to set Gain, Exposure, Focus, Trigger, and Lighting. Inspection Outputs
options allow you to connect your job to the outside world. This is also the view where you can add
multiple tools to the job. The tool icons are located above the main view area.
3-6
MicroHAWK F320-F / F330-F / F420-F / F430-F Smart Camera User Manual