Omron MicroHAWK F320-F User Manual page 136

JOBLOAD {[-slot=]<n>|-mem} [-r]
Loads a job from slot n or from memory when used with the JOBDOWNLOAD command via FTP.
-r = Start inspections.
JOBSAVE [-slot=]<n>
Saves current job to slot n.
MEMAVAIL [-cp]
Returns available memory for device or coprocessor.
MEMCONTIG [-cp]
Returns maximum memory block for device or coprocessor.
MEMFRAGS [-cp]
Returns memory fragments for device or coprocessor.
Important: MEMFRAGS is not supported by the HAWK MV-4000. It will return !ERROR.
MEMINFO [-cp] [-v]
Returns memory summary "avail/contig/frags" for device or coprocessor. Verbose.
OFFLINE
Stops all inspections.
ONLINE
Starts all inspections.
ONLINE? [-insp=n]
Queries if each inspection on the camera is online. Defaults to all inspections if no inspection is specified.
If the camera is running in a multi-inspection job, this command will return !1 if all inspections are online
and !0 otherwise.
-insp=n specifies the inspection to query if it is online.
QUERYAUTOCAL
Returns photometry settings: Gain, Exposure, and Focus.
MicroHAWK F320-F / F330-F / F420-F / F430-F Smart Camera User Manual
Appendices
D
D-5