Omron MicroHAWK F320-F User Manual page 135

Appendices
HELP
Returns a list of all serial commands showing correct syntax and functionality descriptions.
INFO [tagname|service]
Gets information about a tag or service.
INFO with no arguments gets a list of services.
INFO <service> gets a list of tags in that service.
INFO <service.tagname> gets attributes of the tag as well as a list of subtags.
The AVP service allows retrieval of step and datum information from the job tree using forward slash '/' in the
symbolic name path. INFO avp/insp1/snapshot1/status paths are not case-sensitive and do not
need to be fully qualified if unique.
INFO avp/snapshot1/status will return the same result if there is only one inspection.
When issued against a step, INFO avp/snapshot1 returns properties of the step, a list of child datums,
and a list of child steps. Child steps are indicated by a trailing forward slash.
JOBBOOT [-slot=]<n>
Sets bootup job slot n (RS-232 only).
JOBDELETE {[-slot=]n|-all}
Deletes job in slot n, or all jobs if -all.
Important: Does not delete the current job loaded in camera memory.
JOBDOWNLOAD <-transfer={ymodem|ftp}> [-size=value] [-c]
Important: JOBDOWNLOAD only supports FTP on the HAWK MV-4000, as with the GETIMAGE
command.
Downloads a .avz job file via the specified transfer method (ymodem supported only over RS-232; FTP
supported only over network connection).
The ymodem transfer method only requires that the user send the .avz file via the ymodem protocol over
RS-232, and the job will load automatically after the transfer is complete.
The FTP transfer method requires the user to perform the following steps to load the job:
• JOBDOWNLOAD: -transfer=ftp [-size=avpsizeinbytes]
Pre-creates a fixed-size /streamd0 RAMdisk to receive the .avz over FTP. If size is omitted, the default
RAM disk size is used to create /streamd0. The size of /streamd0 is limited to (available contiguous
RAM – minimum target contiguous RAM) / 2.
• User FTPs the job to /streamd0
• JOBLOAD: -mem -r
Loads .avz from /streamd0 into RAM, deletes the RAMDisk /streamd0, and optionally starts the job (if -r is
specified).
JOBINFO [[-slot=]n] [-v]
Gets job summary or info about slot n.
JOBINFO with no arguments returns a list of all jobs on the device.
-v = Verbose n. This option shows the amount of space that would be freed if the job were deleted. It
also lists the total disk space and free disk space.
D-4
MicroHAWK F320-F / F330-F / F420-F / F430-F Smart Camera User Manual