2.1.2.
Setting WizFi630
1.
Connect <PC1> and WizFi630
2.
Enter 192.168.16.254 in <PC1> web browser and connect to the administration web page.
(We recommend directly connecting <PC1> and WizFi630 instead of using hub).
3.
Check the operation mode of WizFi630; select AP mode in case of other mode is being used.
4.
Set the serial settings of the WizFi630 to TCP server as shown below.
(Check the Server Port, Baud rate, Data bits, Parity, Stop bits, and Flow control)
WizFi630 Quick Start Guide
.
(WIZnet Co., Ltd.)
7