Eo5【Setting Error - YAMADA AFC-9000S Operation Manual

E05 [Setting error]
<When this error is supposed to occur>
Circulation mode
After the wasted oil is removed or after new oil is supplied
<Error detecting condition>
When the set value ≤ the amount of the wasted oil removed from the oil pan of a car
When the set value ≤ the amount of new oil supplied to a car
<Why should the machine detect this error?>
Check to see if the set value has no problem with comparing it with the amount of oil contained in the oil pan of a car.
<Display and sound>
Digital display:
Error buzzer:
Signal light, Red:
START LED:
<Causes>
When the machine finishes removing the wasted oil, the amount of the wasted oil removed from a car exceeds the set
value.
Example: When 7.0 L is set, the amount of the wasted oil actually removed from a car is 7.8 L (that is, more than 7.0 L)
and exceeds the set value.
As a result of supply to a car with new oil whose amount is "the amount of the wasted oil removed from a car" + "the
amount of extra new oil for checking the same amount of oil replacement, 0.2 L" after removal of the wasted oil, the
amount of the supplied new oil exceeds the set value.
Example: Although 7.0 L is set, the amount of the removed wasted oil is 6.9 L, and the total of the amount of the
supplied new oil 6.9 L + 0.2 L, that is 7.1 L exceeds the set value.
<How to recover this error>
Use the ▲key to set the value again.
Press the SET key.
When you press the START key, the machine starts supplying new oil. (When the machine finishes removing the
wasted oil)
When you press the START key, the machine starts controlling the same amount of oil replacement. (When the
machine finishes supplying new oil)
"E05"
Sounds.
Change the set value.
Flashes.
Turns off.
24