Eo4【Oil Removal Error - YAMADA AFC-9000S Operation Manual

E04 [Oil removal error]
<When this error is supposed to occur>
Dipstick mode
While the machine is removing the wasted oil
<Error detecting condition>
The machine cannot remove the regulated amount of wasted oil (800 mL or 1,000 mL) while it is removing the wasted oil
after supplying a car with new oil.
<Why should the machine detect this error?>
The machine confirms that it can remove the regulated amount of wasted oil.
<Display and sound>
Digital display:
Error buzzer:
Signal light, Red:
START LED:
<Causes>
1.
Since the nozzle was inserted insufficiently due to the shape of the level gauge, the machine could not remove the
wasted oil whose amount was the same as that of the supplied new oil.
2.
After the nozzle was inserted, its insertion condition became insufficient because its position was shifted.
3.
Since the wasted oil filter is clogged with dust or any other thing, oil cannot flow.
<How to recover this error>
1.
Insert the nozzle so that it can reach the oil surface.
2.
Clean the filter to remove the dust or any other thing.
When you press the START key, the machine restarts removing the wasted oil. When the machine confirms
removal of the wasted oil, it resumes the operation that had been performed before the error occurred.
If the machine cannot remove the wasted oil for any other reason, it detects the E03 error again. Contact our
Service.
The nozzle may not be able to reach the oil surface due to the shape of the level gauge depending on the car type.
"E04"
Sounds.
Insert the nozzle into the level gauge hole securely.
Flashes.
Flashes.
23