3-5.How To Operate; Automatic Mode; Circulation Mode - YAMADA AFC-9000S Operation Manual

3.5 How to operate

3-5-1 Automatic mode

■ Circulation mode

1. Connect the power cable to the AC outlet. (The buzzer sounds for one second.)
2. Press the POWER key.
3. Press the AUTO MODE key once and select "CIRCULATION" mode.
4. Set the amount of oil to be replaced with the ▲key and/or the▼ key, and press the SET key.
Insert the nozzle into the level gauge hole securely.
Attach the connection hoses to the oil cooler lines.
When you hold down the SET key (for two seconds),
the machine enters "
5. Insert the flexible nozzle into the level gauge hole,
and connect the automatic valve to the hoses.
6. Press the START key.
When the machine is set to "クイック,"
it starts operating from Step 10.
7. All the wasted oil is removed from the oil pan.
8. Supply the car with new oil whose amount is 7 + the
checked amount.
9. Start idling the engine.
10. The flow rate of the oil cooler line is checked.
11.While removing oil from the oil cooler line, the same amount of new oil is
supplied the car.
12. When the remaining time becomes approximately 30 seconds, the signal light "blue" flashes (lights during
operation).
*(The description written in "Italics" explains the condition of the automatic operation.)
".
Quick mode
When the machine is in Quick mode
Digital display: "クイック" appears on the display.
Insert the nozzle into the level gauge hole securely.
Attach the connection hoses to the oil cooler lines.
Start idling the engine.
8