Error Codes; Eo1【Oil Removal Error - YAMADA AFC-9000S Operation Manual

4-2 Error Codes

E01 [Oil removal error]
<When this error is supposed to occur>
CVT mode
When automatic oil removal finishes
<Error detecting condition>
The amount of removed oil is 2 L (you can change this amount) or less when the machine finishes removing the wasted
oil from the oil pan of a car.
<Why should the machine detect this error?>
Normally, 2 L or more engine oil is contained in an ordinary car.
If the amount of the removed wasted oil is 2 L or less when automatic oil removal finishes, it may indicate that the nozzle
is inserted incorrectly. Check the nozzle condition.
<Display and sound>
Digital display:
Error buzzer:
Signal light, Red:
START LED:
<Causes>
1.
The nozzle is not inserted sufficiently.
2.
Since the wasted oil filter is clogged with dust or any other thing, oil does not flow.
3.
Only 2 L or less oil is contained in the oil pan originally.
4.
The nozzle does not reach the oil pan sufficiently due to the shape of the level gauge.
<How to recover this error>
1.
Insert the nozzle again so that it can reach the oil surface.
2.
Clean the wasted oil filter to remove the dust or any other thing.
When you press the START key, the machine restarts removing the wasted oil.
If the machine can remove the wasted oil again because you insert the nozzle again to make the nozzle reach the oil
surface, the machine continues removing the wasted oil.
If there is only 2 L or less oil in the oil pan as described at 3 or if the nozzle does not reach the oil surface although
you insert it again, the machine finishes removing the wasted oil, and starts supplying the car with new oil.
"E01"
Sounds.
The amount of the removed wasted oil does not reach the regulated value.
Insert the nozzle into the level gauge hole securely.
Flashes.
Flashes
20