Setting - YAMADA AFC-9000S Operation Manual

■Settings
1. Connect the power cable to the AC outlet. (The buzzer sounds for one second.)
2. Press the POWER key.
3. Press the FUNC. key three times (or four times) and select the "SETUP."
"セッテイ" appears on the digital display.
4. Press the SET key.
5. Press the AUTO MODE key to select the desired setting item (P01 to P09).
Change the setting with the ▲key and/or the▼ key.
When you press the FINISH key, the machine saves the changed setting, and quits this function mode.
When you press the PAUSE/ABORT key, the machine quits this function mode without saving your change.
P01: Initial set amount ("ショキチ" is displayed on the digital display, and the initial value is 7.0.)
Set the amount displayed at first when you set the amount of oil to be replaced in Circulation mode or Dipstick
mode.
3 to 20 L in increments of 1 L
P02: Amount of oil to be removed from a light car for the first time( "ケイジドウシャ" is displayed on the digital display,
and the initial value is 0.2.)
Set the amount of oil to be removed for the first time in Light Car mode of Dipstick mode.
0 to 1.0 L in increments of 0.1 L
P03: Least amount of oil to be removed ("サイショウリョウ" is displayed on the digital display and the initial value is
2.0.)
Set the amount that causes an error, E01.
0 to 10 L in increments of 1L
P04: Waiting time for alternate oil replacement ("タイキジカン" is displayed on the digital display, and the initial setting
is "short.")
Set the waiting time in Dipstick mode.
16