2-4.Setting - YAMADA AFC-9000S Operation Manual

2-4 Setting up
- While the machine is operating, be sure to lock the caster brakes on the flat place. Or, the machine may start
moving depending on the installation place, and it may cause a property damage accident.
- Do not use any power supply other than 220 V AC for the machine. Or it may cause the machine to
malfunction and damage it due to electrical shock or fire.
- Do not expose the machine to direct sunlight for a long time. It may cause the resin parts to deform due to
heat.
1. Stop the car at a horizontal place, and yank the emergency
brake fully to check to see if the braking function operates well.
2. Move the machine next to the car, and lock the caster brakes. (See Fig. 2-4.)
3. Connect the power cable to the 220 V AC outlet, and check
that the buzzer sounds.
4. Before oil replacement, be sure to check the amount of oil with
the level gauge of the car.
CAUTION
5
Fig.2-4