Setting
amount
Less than
5 L
5 L or
more
P05: Guide voice ON/OFF ("オンセイ" is displayed on the digital display, and the initial setting is ON.)
Specify whether to output the guide voice or not.
(Attention: The voice is Japanese.)
P06: Error sound ON/OFF ("エラーオンセイ" is displayed on the digital display, and the initial setting is ON.)
Specify whether to output the sound when an error occurs or not.
(Attention: The voice is Japanese.)
P07: Sound volume ("オンセイレベル" is displayed on the digital display, and the initial value is 7.)
Set the volume of the output sound.
1 to 10 (When you turn the volume too high, the sound may get distorted.)
P08: Buzzer volume ("ブザーレベル" is displayed on the digital display, and the initial value is 7.)
Set the buzzer volume.
1 to 10 (When you turn the volume too high, the sound may get distorted.)
P09: Signal light ON/OFF ("シグナルライト" is displayed on the digital display, and the initial setting is ON.)
Specify whether to turn on or off the signal light.
3-5-4 Other functions
■
f a new oil pail gets empty while the machine is operating
I
1. Automatic operation of the machine stops temporarily. (The buzzer sounds.)
New oil runs out.
2. Replace a new oil pail with another one with following the procedure for setting a new oil pail. (See Section "Setting
a new oil pail" on page 3.)
3. Press the START key.
4. The machine restarts the operation temporarily stopped.
Set value
short
middle
10 seconds
20 seconds
15 seconds
30 seconds
long
30 seconds
45 seconds
17