Dahua IP Villa System Quick Start Manual page 18

The VTH configuration is completed.
Configure Main outdoor stations (VTO) and sub outdoor stations (VTO). There

must be only one main outdoor stations (VTO) and one or more sub outdoor
stations (VTO).
If there are no sub outdoor stations (VTO), then you do not need to do sub outdoor
stations (VTO) configurations.
Select an outdoor station (VTO).
1)
The VTO Config interface is displayed. See Figure 2-13.
Select Main or Sub.
2)
Enter local IP, Network, gateway; select video standard, date format, time format;
set date and time.
Tap OK.
3)
The Configuration interface is displayed. See Figure 2-14.
VTO config
Installation and Configuration
10