Appendix C - Pro9 Auxiliary Connections - Quail Digital Pro9 Installation Manual

Appendix C
Pro9 auxiliary connections - Q-P9ACB
If your system is using a lane timer and/or a chime speaker use the Auxiliary Connection Box and
follow these connection instructions:
Figure17 - Auxillary connector box connections
Plug this interface connection unit into the corresponding connector on top of the base station.
Figure18 - base station (top)
This table provides the information you may require in relation to the auxiliary connections.
Connection Colour
1 White
2 Red
3 Blue
4 Green
5 Brown
6 Grey
7 Purple
8 Yellow
page 12
Description Notes
Chime speaker +ve
For connection directly to a speaker to provide a chime on arrival of a
vehicle at the order point.
Chime speaker -ve
Timer out common
0v switch output to provide vehicle detection to OEM timers or
other equipment.
Timer out NO
Timer greet +ve
Simulated voltage output triggered when headset goes live to
speaker post. Provides "greet" function to OEM timers.
Timer greet -ve
Timer in common
0v to 12v detection to provide third party activation of the headset
system. Typically output from an OEM timer system.
Timer in detect