Advertisement
Figure 10
1. Weight
9.
Place the O-ring on the adapter as shown in
Figure
11.
Figure 11
1. O-ring
2. Adapter
10.
Install the adapter as shown in
11.
Secure the adapter with the flange-head bolt
(Figure
11).
12.
Proceed with the installation as described in the
other procedures.
g032591
2. Screw
g032592
3. Flange-head bolt
Figure
11.
4
Installing the Drive Housing
to the Bearing Bracket
Parts needed for this procedure:
1
Drive-housing assembly
1
Bracket assembly (drive side)
2
Hex-socket screw (1/4 x 3/4 inch)
Procedure
Use 2 hex-socket screws to install the drive-housing
assembly to the bearing bracket.
1. Hex-socket screw (1/4 x
3/4 inch)
2. Drive-side-bracket
assembly
6
Figure 12
3. Drive-housing assembly
g032459
Advertisement
