Grinding Circular Saw Blades; Cleaning And Maintenance - Westfalia 2003 Original Instructions Manual

Grinding Circular Saw Blades

1. After all settings have
been accomplished, the
spring adjustment stop
(D) must be adjusted to
exert some pressure on
the saw blade.
2. To grind the saw blade
now turn on the ma-
chine by pressing the
ON/OFF Switch (G) in
direction I and move the spinning grinding stone over the
tooth against the depth limiter with the lever. Pull back the
spring stop and move the saw blade one tooth until all teeth
have been machined.
3. If the teeth are offset, grind every second tooth and then
readjust the grinding angle to grind the remaining teeth.

Cleaning and Maintenance

 Always pull the power plug before undertaking any kind of
work on the machine.
 Always keep the machine clean and dry. Use only a slightly
moist cloth to clean the machine. Do not use aggressive
chemicals or abrasives.
 Slightly oil moving part if necessary.
 The motor is maintenance-free. Always keep the ventilation
louvers clean and free from obstructions.
Assembly and Using
19
D