Saw Blade Support
For best results it is necessary to position
the saw blade support as close as
possible to the grinding stone to steady
the saw blade.
Offset Teeth
1. For saw blades with offset
teeth the motor machine must
be tilted. To do so, loosen the
clamping nuts on both sides
and tilt the motor machine as
desired. The motor machine
can be tilted 25° in both direc-
tions.
2. Under some conditions it can happen
that the desired angle can not be set
because the motor machine hits the
base plate.
3. In such a case turn the motor machine
by 180° in its mounting flange. To do
so, loosen the clamping screw in the
mounting piece.
Assembly and Using
18
B
Clamping Nut